The Nikwax Twin Tech Wash/TX Direct Wash In is what you use when your waterproof clothing soaks up water. Your raingear could be soaking up water just because it is dirty. Use Nikwax Tech Wash to clean it, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalised just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct, always cleaning first with Nikwax Tech Wash.

Nikwax Twin Tech Wash/TX Direct Wash In Features:
Tech Wash:

• Prolongs the life of gear and optimises outdoor performance.
• Maintains breathability.
• Maintains original water repellency.
• Easy to apply - can be used in a washing machine.
• Suitable for use on all fabrics, including technical textiles.
• It lifts out dirt that can attract water and mask water-repellent finishes.
• Unlike conventional detergents, it does not leave behind attractive water residues that encourage 'wetting-out'.
• Capacity: 300ml

TX.Direct:

• Adds/renews water repellency and revives breathability.
• Prolongs the life of gear and optimises outdoor performance.
• Easy to apply - can be used in a washing machine, no tumble drying required.
• Will not affect cosmetic appearance.
• WaterBased - environmentally friendly, biodegradable, non flammable, non hazardous.
• Does not contain fluorocarbons.
• Capacity: 300ml

Nikwax Twin Tech Wash/TX Direct Wash In How to use:

Tech Wash

IMPORTANT: Do not use conventional detergents. Use undiluted Tech Wash to treat stubborn stains before washing.

Machine Wash:

• 1. Remove all detergent build-up from the detergent dispenser.
• 2. Place maximum of 2 garments in washing machine.
• 3. Use 150ml in medium/hard water areas and 100ml in soft water areas.
• 4. Run a 30°C synthetic cycle on a slow spin.

Hand Wash (use gloves):

• 1. Immerse item(s) in 7.5L of warm water.
• 2. Add 150ml in medium/hard water areas and 100ml in soft water areas for 1-2 items.
• 3. Agitate to mix.
• 4. Rinse 3 times in clean water.

Drying:

• Do not dry before waterproofing. Air dry or tumble dry on a low setting if care label allows.

TX.Direct Wash-In

IMPORTANT: Shake bottle before use. Do not use conventional detergents. Always clean first with Nikwax Tech Wash in a separate wash cycle. Do not dry before waterproofing.

Machine Wash:

• 1. Remove all detergent build-up from the detergent dispenser.
• 2. Place maximum of 2 clean garments in washing machine.
• 3. Add 100ml of TX.Direct® per garment.
• 4. Run a 30°C synthetic cycle on a slow spin.

Hand Wash (use gloves):

• 1. Immerse 1 clean garment in 7.5L of hand hot water, in a bowl or sink.
• 2. Add 100ml of TX.Direct®.
• 3. Agitate to mix, leave to soak for 5 minutes, then agitate thoroughly.
• 4. Rinse with cold water until water runs clear.

Drying:

• Air dry or tumble dry on a low setting if care label allows.